Product Details
- Ordering Information
- Specifications
- Environmental Specifications
- Fixture Applications
- Installation
- Downloads
Ordering Information
|
PRODUCT |
APPLICATION |
CONNECTOR |
|
POE-ELN2- PoE Emergency Light Node Assembly (Gen 2) |
1U- 1 Channel |
ST Screw Terminal
|
|
2U- 2 Channels |
||
|
4U- 4 Channels |
Sample: POE-ELN2-2U-ST
specifications
|
Connect Software Requirement |
Minimum V2.0 |
|
Ethernet Interface |
10 BASE-T MDI RJ-45 |
|
Ethernet Interface Power Specification |
Complies with power levels of IEEE 802.3af, 802.3at and 802.3bt, PoE, PoE+, UPoE or UPoE+ (Power over Ethernet) |
|
Max Input/Output Voltage |
60V DC/50V DC |
|
Maximum Power Draw |
Up to 90 Watts |
|
Maximum Output Current |
Channel and Model Dependent 100- 2000mA, DC 1 to 4 Channels Nominal Maximum Output Current as Supplied |
|
Peripheral Communication Bus |
2-twisted pairs 18-24 AWG Stranded or Solid wire 1 Pair – 1 Mbps differential data pair – CAN 2.0 (ISO 11898-2) 1 Pair – +12 VDC @ 500mAmps Maximum |
| Maximum Aggregate Power Output | Up to 90 Watts (Including all 4 LED Channels and Peripheral Keypads & Sensors) |
environmental specifications
|
Safety Compliance |
UL 916 & UL 2108 – E480040 |
|
ROHS |
Compliant |
|
Normal Operating Temperature and Altitude (Density Altitude) |
-5°C to +45°C, up to 5000ft (1500m) -5°C to +40°C, up to 10,000ft (3000m) Min ambient temperature for cold start is 0°C |
|
Relative Humidity |
10% to 95%, noncondensing |
|
Storage Environment |
Temperature: -40°C to +70°C Altitude: 15,000ft |
|
Location |
For use in dry locations. |
fixture applications on emergency light node
| Static White Fixtures | Tunable White Fixtures | ||||||
| Emergency Lights | Normal Power Lights | Peripherals | Emergency Lights | Normal Power Lights | Peripherals | Exit Signs | |
| 1 Channel | 1 | 0 | 1 | n/a | n/a | n/a | Up to 4 exit signs or max 8W load |
| 2 Channel | 1 | 1 | 1 | 1 | 0 | 1 | Not Recommended |
| 4 Channel | 1 | 3 | 1 | 1 | 1 | 1 | Not Recommended |
| Peripherals: Wall Stations, Sensors, Emergency Test Button 1.Additional fixtures may be added to emergency light node not to exceed maximum Network port wattage. 2. If multiple fixtures are installed on the ELN, All fixtures must be the same type and have the same current drive (mA). |
|||||||
Installation
